An Allergy-Free, Eco-Friendly Kitchen ~ uPVC Board

uPVC Polymer Board

Due to my sensitivities to terpenes, as tested and diagnosed by my Allergist and Immunologist, Dr Colin Little, I think we will be using uPVC (or PVCu if you’re in Europe) board for the cabinets, not the doors, just the carcass. Think pharmaceutical bottles: hard white plastic. Well this board is like that but baked so it’s even sturdier. Pine is a huge problem for me due to the terpenes (the frame of our house is made from hardwood, which I will be blogging about next. Hardwood is not generally used in kitchens unless it’s a softer wood like oak, which is costly. (You can read more about oak as doors here [link coming soon].) (And you can read more about a Green and formaldehyde free chipboard/particleboard, Ecological Panel, here.)

What is uPVC?

Regular PVC (polyvinyl chloride) is a common, strong but lightweight plastic used in products such as underground piping (Due to the PBA’s contained, we used it only for the outgoing sewage pipes.). It can be made more pliable with the addition of plasticisers, which may contain phthalates. If no plasticisers are added, it is known as uPVC (unplasticized polyvinyl chloride); or in the US, it’s called  ‘vinyl siding’ or rigid PVC. So the ‘u’ just means that it’s un-plasticised, more durable and a harder product without the plastic softeners such as phthalates!

Is it Safe for People with Health Issues?

From Diffen, where you can compare anything:

Safety and Risks

PVC-coated wires can form HCl fumes in a fire, which can be a health hazard. Plasticizers may leach out of PVC into the environment.

Phthalates are what allow PVC to be flexible. Some of the phthalates used in PVC have been restricted or banned over the years, and many others are being replaced with safer phthalates. Dibutylbenzyl butyl, and DEHP are some of the more commonly banned or restricted phthalates.

To date, there are no mainstream concerns regarding the use of uPVC, which does not use phthalates or BPA.

Read more about the differences here

modern contemporary kitchen

(Source: image from Pixabay)

What if you’re Chemically Sensitive to Plastic?

It probably doesn’t need to be pointed out that if you have contact allergies, inhalant allergies or sensitivities to plastics, then you wouldn’t use this product. Personally, I have tested it extensively (meaning slept with it on my bedside table, and later, held it to my face, and placed it in the sun to see what happens when it heats up…). I don’t have breathing problems with plastic; ergo, plastic bags from the supermarket cause my eyes, nose and upper respiratory irritation due to the cleaning chemicals and fragrances embedded in them just from where they are stored: in shops that sell chemicals alongside foods?! (*Don’t worry; it’s perfectly safe to eat bread that tastes like cleaning chemicals*) I’ve also asked my doctors, both specialists in allergies and sensitivities, about using this uPVC in our window frames, and possibly our kitchen. uPVC is on my safe list. You need to check before adding it to yours or someone else’s who has sensitivities to chemical irritants. It’s also noteworthy that many people who suffer physical symptoms from exposure to plastic, often, due to petrochemicals, or it’s the plasticisers that make PVC soft for other uses, like dog or children’s toys, that are causing the issues. (Yeah, I see that, due to phthalates, they may not be safe for anyone! The book, Slow Death by Rubber Duck gives good examples and citations on this issue.) However, this is not a rule. We are all so different; and, I am not a scientist or a doctor, just in case you didn’t know!

It can be confusing, I know. If you just remember the ‘U’, which stands for unplasticised and means it’s a different material than PVC, which is the softer plastic, often containing PBAs and/or phthalates  depending on where it is sourced from.

Some uPVC products are stabilised with other chemicals; but I’ll get to this with my post on uPVC windows from Zenit Windows asap. Just because we are chemically sensitive, in my opinion, it doesn’t mean that we need to live without chemicals. They are useful; we need them! They can help us solve many of the issues we have to deal with. Again, there are no rules; we are all different. I think people who are mould sensitive may do better with this type of material due to the fact it cannot absorb water.

Use in Outdoor Kitchens

uPVC board is used to make outdoor kitchens because it is resistant to mould and moisture buildup. Your Custom Cabinets in Geelong kindly gave us a large sample piece to take home for testing purposes. Now this was before we decided on the Zenit uPVC window frames, so I was dubious because of the uPVC and tips from some solid sources on the internet in regards to choosing products for people with chemical sensitivities, however, the anti-mould factor won my attention because this board is mostly used for outdoor kitchens as explained by Rod during our outdoor meeting.

More from ‘Your Custom Cabinets’ Outdoor Kitchens

“Take advantage of your outdoor living area with one of Your Custom Cabinets outdoor kitchens. Transform your backyard, patio or entertainment area with custom cabinets or an outdoor kitchen or barbecue. Talk to Your Custom Cabinets joinery for ideas on benchtops, cabinets and shelving and we can custom build the perfect outdoor entertaining area for your home.”

The board is mould proof, inert, and baked so that it’s hard. I have heard, from other sources, that if painted in 2pak (which is baked on just like powder-coated paint) and left to bake in the sun—as outdoor kitchens are left to do—and, if not under the cover of a veranda or similar structure, the paint will fade, especially the darker shades. However, indoors, we won’t have this problem.

How does it Feel to Touch?

If I were to describe how it feels: it’s dense, heavy and solid with know porous areas; it’s also smooth and impervious to water.

My first question about this product: VOCs, give me data on that, please

First, we will clear up the brand name issue: The board was marketed as Neemaboard, however, it’s now Cowdroy. It could also be sold under other names, if you know of more brands or places who sell products like this, please drop a comment down below. It will be most helpful for those of us who must think outside the square bubble for health issues.

MSDS for Cowdroy Board

My readers know I get excited when businesses are transparent and just hand over MSDS and other information such as:

COWDROY POLYMER BOARDS

SAFETY DATA …………………………………………………………………………..15th Jan 2015

The Wetline and Signline board supplied by H.M. Cowdroy , are a foamed PVC extruded board. Wetline and Signline do not contain any hazardous chemicals and as such are not scheduled under the G.H.S ( Global Harmonized System of Classification and labelling of Chemicals )

As a guidance to composition and safety when working with these board, we issue the following synopsis on safety data information, supplied to us by the manufacturer.

Product

Foamed PVC board, available in the Australian market under the brand names WETLINE and SIGNLINE.

Composition

Poly Vinyl Chloride ( P.V.C) with a Calcium Zinc based stabiliser .

NO Lead or Organo- Tin additives are used in the manufacture of this product.

Hazard Information

Wetline and Signline , are non –harmful in the solid state .

Working with these products

Normal safety equipment, Goggles, Gloves , and Dust masks should be worn when cutting or machining this product .

For high speed cutting or machining, extraction and ventilation is recommended to remove fumes and dust.

Inhalation

If dust particles are inhaled, move to an area free of dust, preferably in the open air

Seek medical advice if discomfort persists.

Ingestion

Rinse mouth to remove particles, and drink water as required.

Contact with eyes

Contact lenses ( If worn) should be removed , flush eyes with clean fresh water , holding eye lids apart , until all dust and discomfort is removed .

Seek medical advice if discomfort or irritation persists.

Contact with Skin

If irritation to skin occurs, remove contaminated clothing , wash skin with soap and water ,and dry ,

Seek medical advice if discomfort or irritation persists.

Disposal of product

Do not incinerate, check with Local Authority guidelines relating to disposal of waste.

Fire Fighting Measures

In the event of fire, instruct personnel to evacuate the area, and inform Fire Fighters that the board comprises of P.V.C compounds and Calcium Zinc based stabilisers .

If fire extinguishers are used, Water, Foam, or Dry Powder are suitable.

How to Know if This is the Right Product for Your Allergy-Free Kitchen

Personally, when I asked my treating Allergist and Immunologist, who said, “It should be fine.”, I trusted that because I’ve been treated by this doctor for over a decade.

I also tested the large piece, given to us by Rod Bird at Your Custom Kitchens, who I found on Houzz, via just breathing near it. Later I put in out in the sun, then held it up to my face. I don’t recommend others do this; it’s just something I felt safe doing.

Some people practice Kinesiology; or go and see one themselves to find out if a product or chemical is suitable. I, however, will always trust my own bodily physical symptoms over what any therapist or doctor says. But just know, especially if you are skeptical of Kinesiology, this is the only way some people can test products because they are that exquisitely sensitive to so many substances, that they have no choice; so you need to just stand back and respect that method if someone tells you about it! (Also note, you can learn to do this yourself, I hear on the GE-free, organic grapevine!

If in doubt, trust your own instincts. If in doubt of your medical practitioner, get a second opinion or even a third!

More about ‘Your Custom Cabinets’:

Your Custom Cabinets is owned and operated by Rod Bird with over 30 years experience in the industry. We design, create and install Kitchen, Bathroom, Laundry and Living spaces cabinets shaped to suit your lifestyle.

Services Provided

Your Custom Cabinets can provide everything from design conception through to hassle-free installation of cabinets crafted to meet your individual requirements. We can also fully co-ordinate all trades people needed for your project.

Areas Served

Geelong, Bellarine Peninsula, Surf Coast, Ballarat, Colac and Melbourne.

Mobile: 0418 526 990

Email: rod@yourcustomcabinets.com.au

Business Hours

Monday – Friday

7.30am – 4.00pm

After hours by appointment. Or you can fill in their contact form, here

Building Biologist Recommendations for Outgassing Our New Kitchen

Whether we choose Ecological Board or Cordory, uPVC board, for the cabinet frame, or I find another product) we have planned an outgassing process (used over in the states; now adapted for summer Australian climate. (My caring vegan man, Dan, has developed this procedure over the last decade. The plan: bake the house when it’s new, sure, but renowned Building Biologist, Raphael Siket, Director of Ecolibria here in Torquay on the surf coast of Victoria, Australia, Victoria, has suggested we order the kitchen as soon as possible; then, laying the pieces out on specially placed shelves to get the outgassing treatment right before installation.

Ah, but what about when the kitchen heats up?

This was a question put to me on one of the local forums here in Australia where we discuss all things relating to living with allergies, food intolerances, mould and medical conditions relating to chemical sensitivities. Hopefully, when our kitchen heats up this won’t be an issue because we’ve already sped up the process using this exact procedure. If it is, I have to stay upstairs with stairwell door closed until it’s ready; however, this is the plan:

  1. Order the kitchen panels weeks, months even, before installing them;

  2. Place them inside the house where there is good air-flow;

  3. Set up some shelving against the wall in the kitchen area (of course the space is empty so there’s lots of room)

  4. Have fans running, pointed in the direction of the temporary shelving;

  5. Place the pieces of kitchen boards separately on the temporary shelving;

  6. Give them a wipe over with a solution of bicarbonate of soda, vinegar or you preferred cleaning product (I usually use Seventh Generation Free and Clear: All Purpose Cleaner but in this case, I’d start with the bicarbonate of soda as it absorbs chemicals, odours etc.);

  7. Make sure there is plenty of airflow between the boards, which are holding the panels to help them outgass their ‘newness’;

  8. At a temperature of 30-40 Degrees Celsius, heat the house up periodically, for 12-24 hours each time to bake out any wood terpenes, chemical-irritants (depending on what product you choose to use) or any residual odours left over from handling or manufacturing; keep the fans running as this will help the process along nicely;

  9. After each baking session, turn the heat off completely, leave the fans running and open all the windows of the house (ceiling fans will help greatly at this point).

More

Book about plastics, chemicals and their ability to build up within humans and animals: Slow Death by Rubber Duck

More on testing via Kinesiology: Australian Kinesiology Association

My Chemical Free House: A Non-toxic Kitchen

The Eco-Friendly, Allergy-Free Kitchen Series

 An Allergy-Free, Eco-Friendly Kitchen—Oak. Glass or uPVC or Composite Panels?

 An Allergy-Free, Eco-Friendly Kitchen—By The Allergista: What are Your Countertops Hiding?

An Allergy-Free, Eco-Friendly Kitchen—Ecological Panels, and Building Biology Service, EcoLibria

An Allergy-Free, Eco-Friendly Kitchen—uPVC Board

An Allergy-Free, Eco-Friendly Kitchen—Benchtops

An Allergy-Free, Eco-Friendly Kitchen ~ A Recap on the Low Irritant Kitchen

Michellina Van Loder is a Professional Writer, Journalist and Blogger. This is where she shares her tales about trail blazing her way out of the Labyrinth of Chemical Sensitivities and Mould. This is also where you will find the latest Research on related topics.

An Allergy-Free, Eco-Friendly Kitchen—Ecological Panels, and Building Biology Service, EcoLibria

(Reading Warning: this is a long post so put your reading glasses on and get on with reading it.)

In our last post in the series ‘Part II: An Allergy-Free, Eco-Friendly Kitchen: ‘What Are Your Countertops Hiding‘ by The Labyrinth’s lovely Guest Blogger Jennifer, aka The Allergista, who posted about avoiding skin contact allergens and chemical-irritants when choosing your benchtop coating!

Thank you, Jennifer xoxo.

Click image to visit The Allergista

Click to visit The Allergista

Today, however, we share ideas on creating a low-allergy, low-chemical-irritant containing, eco-friendly kitchen; all while avoiding inhalant allergens and chemical-irritants! This post is peppered with helpful tips from Building Biologist: Raphael Siket, Director of Ecolibria, right here in Torquay on the Surf Coast of Victoria, Australia!

A few months back, he visited the Build an Eco-Friendly, Allergy-Free House project to make some recommendations on 2 of the potential mould issues we’re facing due to steel beam placement (and, until our latest (almost), and hopefully only mega-mould disaster hit, which I will blog on later, we thought all mould issues were under control. Some of you may know, they are not! But more on this later.

(Once I fully have calmed down, gathered all the assessment notes, water readings, Remediation advice and our building surveyor’s opinion, I promise to share all the growing Hyphae details from the metaphorical Petri-Dish, our house!, as soon as I get our plan back on the track to an ERMI under no. 2.)

First, more about our Building Biologist, Raphael, from the Ecolibria website:

“Ecolibria is proud to announce that they are now helping to create and build customised healthy homes.  A home constructed from ethical, healthy and great quality materials and finishes and one that embraces the high and exacting standards of building in accordance with your specific requirements and our Building Biology principles that will help to create a home that supports your health and well being.
We are now able to help build homes to the west of Melbourne from Werribee to the Bellarine Peninsula, along the Great Ocean Road and out to Colac.”

This is great news for people who need low-toxic, mould-free and allergen-free homes that have a low impact on the environment, yes? However, we employed Raphael to come out to our build to help us choose the right solutions for the issues we are facing. One of these have been taken care of, and bricks are going about around it as I write.

Boral Augusta Limestone Brick for the Build an Eco-Friendly, Allergy-Free House Project

Boral Augusta Limestone : Build an Eco-Friendly, Allergy-Free House Project

On one of the forums I hang out on, in regards to a different product, not the Ecological Panels, another chemically sensitive person asked me:

“What about when the kitchen heats up when the oven is being used, especially in summer? What if it releases irritants that make me sick?” What a great question! And it’s one I asked Raphael.

So after talking through our potential mould issues, this was one of the last issues we touched upon: baking out our kitchen before installing it. This is such a great idea. For us, the materials are still being decided upon, one of which I’m sharing with you today: Ecological Panels! (There’s one more product we’ve found but I’ll write about it next time in the ‘Allergy-Free, Eco-Friendly Kitchen Series’.)

Here are some hot tips we put together from talking to Raphael, Building Biologist from EcoLibria

Order the kitchen panels weeks, months even before installing them;

  1. If you are chemically sensitive, have a medical condition such as Asthma, CIRS, MCS, Pulmonary Disease or any other condition impacted on by chemical-irritants, wood terpenes or a lack of oxygen, please make sure you have someone else carry out this procedure for you. And, like me, no matter how much you want to check out what’s going on, stay away until the cabinets have been assembled;
  2. Place them inside the house where there is good air-flow;
  3. Set up some shelving against the wall in the kitchen area (of course the space is empty so there’s lots of room to carry this out! You could use hardwood beams and concrete blocks; or get your carpenter to set them up, fixing them to the wall like we most likely will.)
  4. Have fans running, pointed in the direction of the shelving (We have industrial fans being used on other parts of the house that we will use. They are big, noisy, blowy fans, perfect for the job): They are called ‘Industrial Fans’ at Bunnings;
  5. Place the pieces of the kitchen separately on the temporary shelves;
  6. Give them a wipe over with a solution of bicarbonate of soda, vinegar or you preferred cleaning product (I usually use Seventh Generation Free and Clear: All Purpose Cleaner but in this case, I’d start with the bicarbonate of soda as it absorbs chemicals, odours etc.);
  7. Make sure there is plenty of airflow between the boards, holding the panels to help them outgass their ‘newness’;
  8. At a temperature of 30-33 Degrees Celsius, heat the house up periodically, for 12-24 hours each time to bake out any wood terpenes, chemical-irritants (depending on what product you choose to use) or any residual odours left over from handling or manufacturing; keep the fans running as this will help the process along nicely;
  9. After each baking session, turn the heat off completely, leave the fans running and open all the windows of the house (ceiling fans will help greatly at this point; and there will be no furnishings in the house to reabsorb anything related into the air.);

We spoke about getting workers to go fragrance-free for the project (more tips on this coming up in another post); and we touched on some of the materials available.

The first and most impressive on my list:

Ecological Panels:

A wood sheeting somewhat like particleboard (aka chipboard in some countries) but unlike particleboard at all because it does not contain formaldehyde or other any other chemical-irritants. However, this product looks like real kitchen board, therefore, it is real kitchen board! It is also made in Europe; another bonus due to their high standards when it comes to harmful chemicals and consumers:

“The World Health Organisation lists formaldehyde as a known carcinogen. The risk depends on the concentration. You can start your research by reading this WHO document.

Very unfortunately, many Australian homes, work places and schools have furniture made in countries where formaldehyde is of little or no concern. This furniture may contain dangerous levels of formaldehyde. Even good quality furniture made in Australia can be made of panels, which may contain arguably dangerous levels of formaldehyde.

Some local panel manufacturers and suppliers – to their credit – boast product which meet the Super E0 standard, but these come at a significant price premium. The SuperE0 standard requires no more than 0.3ppm formaldehyde. Ecological Panel has just 0.05ppm – eight times less than the Super E0 standard. In fact, Ecological Panel has so little formaldehyde that it is like natural timber. And it is price competitive.

Moreover, whilst many panel products can boast lower formaldehyde emissions, they may still emit substances of very high concern or (SVHC) as listed by the European Chemical Agency. You can see the list on the ECHA List. Ecological Panel contains none of the chemicals listed.”

Ecological Panel

Ecological Panel. The only truly green, low-toxic, formaldehyde-free particle board on the market in Australia that I have located so far! And because it’s made to European standards and regulations, it’s a damn site safer than your average particle board, aka chipboard. This type of board is used in most kitchens and has been for years. Sometimes it’s completely sealed in laminate. And, as mentioned, because it’s formaldehyde-free it is a total bonus for canaries (and Phoenixes) and people who have illnesses impacted on by chemical-irritants.

(See Part II: ‘What Are Your Countertops Hiding‘ by The Allergista for avoiding skin contact allergens and chemical-irritants when choosing your benchtop coating! You can also download her free guide to finding the latest Allergy and Eczema Products while you are there.)

There are a few options with this board:

This board can be ordered laminated in lovely colours and beautiful finishes like their wood patterns, which I love.

Italian-made Ecological Panels, the only formaldehyde and low voc kitchen cabinet board. Looks like particle or chipboard but it's not!

Ecological Panels, the only formaldehyde and low voc kitchen cabinet board. Looks like particle or chipboard but it’s not!

Most people will go for the budget option and have it laminated; and it can be ordered this way. This could be okay if you test the product to make sure you are okay with your inhalant allergies, or airway inflammation, such as in my case caused by CIRS. And, you might be able to test it for any dermatology type reactions, or, if you do have skin allergies you can ask your specialist or doctor, or better still, do what us science-based bloggers do: do your own research. Ask your kitchen cabinet maker what’s in the laminate; for a list of the usual suspects for skin allergies in laminate, you can start here at  ‘Part II: An Allergy-Free, Eco-Friendly Kitchen: ‘What Are Your Countertops Hiding‘  by The Allergista

You can see all of the replicated colours of wood, stone, fabrics, here.

I’ve had a pile of samples sitting on my desk taunting me with what I need to be doing (this, writing about the product! While sick, laying in bed watching Netflix and sucking on Oxygen. Yes, Facebook too!). All the time, I couldn’t smell a thing, nor have I ever felt sick when I slept with the above pile on my bedside table. (I only aired them for 2 days outside before bringing them into my airspace.) As I do with everything but, it’s usually a standard 2-4 week venture of airing a product before bringing them in for testing on my airways. Always, always, Dan, my build partner, carer and part-time editor (Yep, you can now blame him for my spelling mistakes. (No, not really, you are all still free to pick them out and email me about them, here, at The Labyrinth, lol) He’s also chief sniffer around here.

Dan’s result? Nada Nothing. And he’s got a nose, I can tell you!

Dan, the Caring Man, Does the Sniffing around here so I don't have to breath in chemical-irritants from paints etc.

Dan, the Caring Man, Does the Sniffing around here so I don’t have to breath in chemical-irritants from paints etc.

But Really, What Does it Smell Like?

Once aired, subjectively, of course, I notice a slight woody odour. Not like chipboard, which I have had to cover with Aluminium foil as suggested by one of my treating doctors, in the past. My only concern, and this is a personal one, is the amount of pine that has gone into the product: terpenes outgassing into my living space could be an issue if I am actually chemically sensitive as opposed to having CIRS with chemical symptoms as a result of that. Meaning that if, or rather when I recover from CIRS, terpenes won’t be a problem for me. However, if I am still chemically sensitive (actually have MCS, even though it doesn’t have a medical code, yet, in Australia; therefore might not exist if I go to the Emergency Ward at a hospital), then having terpenes in my kitchen could be an issue difficult to deal with if the kitchen is already installed. Foil anyone?

Other Options for Using Ecological Board in Your Kitchen if Wood Terpene Sensitive

Even traditional chipboard can be completely sealed in for some people sensitive to irritants. But with this low VOC cabinet panels, my research shows you could have them sealed in a 2 Pac finish; similar to that of a powder coated (baked on paint) colour of your choice. Matt, semi-gloss or gloss. I’d go for matt in Ecru (a light tan/beige colour). Someone with terpene allergies could seal the lot: cabinets, kickboards and doors. Or, the next solution in Part IV of An Allergy-Free, Eco-Friendly Kitchen

What is a 2 Pac Kitchen Cabinet Finish?

More from Home Improvement Pages.com:

2 pac or 2 pak is short for 2 pack. “Two packs of what?” you ask. That’s where it gets a little complicated.

Most paints and clear finishes are solvent based. The solvents, or thinners, are what enable the finish to be applied with spraying equipment. When they evaporate, the finish hardens and sticks to the surface. 2 pack finishes work differently. A 2 pack finish consists of two containers (packs) of liquids:

  • One pack contains a resin composed of acrylic paint and melamine.
  • The other pack is a hardener, Poly-isocyanate Resin.

When the two packs are mixed together, a chemical reaction occurs that causes the mix to harden. Because only a small amount of solvent is in the mix, almost nothing is lost by evaporation and the result is a thicker, harder finish. The disadvantages of 2 pac are all in the process of applying the finish:

  • 2 pac dries slowly, so must be applied in a dust-free environment.
  • Heat speeds up the drying process, so a temperature controlled environment is ideal.
  • The hardener contains isocyanate, a toxic chemical. The person who sprays a 2 pac finish must wear a special breathing device and work in a ventilated spray booth to apply it safely.

2 pac finishes are safe after they dry, but applying them requires expertise and an expensive spray booth and equipment. That’s why 2 pac finishes are more expensive than others.

It can be coated and baked in 2-pack paint, where it becomes similar to powder coating on metal. It’s resilient to small hands, chips and dents caused by day to day life.

This would be the most sensible option, especially for the doors if you can afford it and have done your research into which paint the company you choose would use. If we do our kitchens, yes, I have a small one upstairs and Dan has the main one downstairs. (There is a external door from Zenit Windows that seals the upstairs off form downstairs.

This is what Ecological Board have to say about their product:

  • Beautiful and available in many flat, embossed (vertical & horizontal), super-hard finishes utilising ultra-high quality 120gsm melamined paper. This makes it suitable for medium-duty bench tops (like vanities and work stations). It’s ideal for sustainable building.

  • Non toxic. It is certified to be the lowest formaldehyde-emission, recycled particleboard on Earth. The SuperE0 standard specifies no more than 0.3ppm formaldehyde. Ecological Panel’s 0.05ppm leaves this in its wake, and easily meets the CARB Phase 2 criteria. And it is completely free of nasty VOCs. On top of all this, it boasts a negative carbon footprint.
  • The Earth’s only panel whose substrate is made from 100% certified post-consumer-recycled particleboard – making it one of the most sustainable building products. Adding the lamination means Ecological Panel is certified FSC Mix 99%. But this doesn’t demonstrate Ecological Panel’s strength. To better understand, see the page on recycling.
  • Made in Italy by one of the largest panel makers in the world, with more than 50 years experience
  • Available in economical machine size at 3640x1860mm with matching 21 x 1 mm ABS edging.
  • Competitive in price with non-‘green’, non-recycled, E1 emission boards* *excludes carcass material.

Bella, doing her job at the Build an 'Eco-Friendly, Allergy-Free House' Project!

Bella, doing her job at the Build an ‘Eco-Friendly, Allergy-Free House’ Project!

 

What are those green bits mixed in with the wood?

The Trade Marked green dye shows that the product is water resistant. Typically, people can have this in wet areas. Personally, I thought the dark green pieces were Rat Sack (small forest-green-coloured pellets sold as rat and mice poison, which in Australia can kill small so-called ‘pests’ but also marsupials that are on our endangered list, here on the Surf Coast, The Bellarine and The Mornington Peninsula of Victoria.

Ecological Panels Samples of low VOC, Formaldehyde Free

Ecological Panels Samples of low VOC, Formaldehyde Free

Where to Get it

There are 27 pick-up points around Australia.

Contact Details

  • Ecological Panel is distributed in Australia and New Zealand by Zoneform Pty Ltd.

03 9015 7900

mail@ecologicalpanel.com.au

Certifications and Data Sheets for Ecological Panels

Certifications for the Origin of Materials 

Other Supporting Documents

Download (PDF, 337KB)

From Ecological Board: Material Data Sheet

From Ecological Board: CARB Certificate

From Ecological Board: Re-Made in Italy

From Ecological Board: Saviola FSC Certificate

From Ecological Board: Warranty

2 Pac Information Information

2 Pac Information: Home Improvement Pages

Just one choice (so far) of Low VOC 2Pac paints (cut and polish, single pack) can be provided by Northern Industrial Coatings at Thomastown.

More Research that I Found out just for you

Ecological Board tell me that it’s the trade secret on the dark-forest-green-coloured ingredient speckled throughout that keeps the VOC so low. I respect that they don’t keep it a secret that it’s actually a secret, trademarked ingredient! It has passed Europe’s strict laws on harmful chemical-irritants, which is far better than anything Australia has to offer as far as manufactured boards and panels go,

More from Ecological Panels:

“Moreover, whilst many panel products can boast lower formaldehyde emissions, they may still emit substances of very high concern or (SVHC) as listed by the European Chemical Agency. You can see the list on the ECHA List. Ecological Panel contains none of the chemicals listed.”

The Australian Ecological Panel suppliers accept the fact that the company that makes them say that it doesn’t contain any of the-above-mentioned chemical-irritants. If you have a particular ingredient toxin or chemical irritant that you need to know about they will tell you if it’s in there. And, they don’t have the green tick because of that ingredient in the resin.

I like that this product has passed the ECHA standards, and of course because it’s sold as mould impervious.

A lower spec version is sold to Ikea because it’s the lowest emission board available. This E1 product meets the super E zero. This version has 6 times less emissions than Ikea’s version.

Most definitely, the best things going for this product are the fact there are no VOCs or formaldehyde!

Fun Mould Fact!

In Imported Italian Kitchens, the cabinetmakers often leave voids behind the cabinets; these allow air flow behind, meeting the air pocket under the cabinet, behind the kick-board. In Australia, with no sufficient building code at all for mould prevention, they are built, put back hard up against the wall; if moisture gets into such a tiny gap, mould will grow. Instead they set it off the wall by 30 mm, which decreases the growth of mould. This is what I will be telling our kitchen cabinet maker.

Oak Doors

Oak Doors can be bought at High-tech, just ask for Mario in Camberfield. I am told these are the best quality doors if you are to have oak, which I think looks lovely in a matt clear coating, just to protect the wood while highlighting it’s natural finish.

The Eco-Friendly, Allergy-Free Kitchen Series

An Allergy-Free, Eco-Friendly Kitchen—Oak. Glass or uPVC or Composite Panels?

An Allergy-Free, Eco-Friendly Kitchen—By The Allergista: What are Your Countertops Hiding?

An Allergy-Free, Eco-Friendly Kitchen—Ecological Panels, and Building Biology Service, EcoLibria

An Allergy-Free, Eco-Friendly Kitchen—uPVC Board

An Allergy-Free, Eco-Friendly Kitchen—Benchtops

An Allergy-Free, Eco-Friendly Kitchen ~ A Recap on the Low Irritant Kitchen

Our Building Biologist: Raphael Siket, Director of Ecolibria, right here in Torquay on the Surf Coast of Victoria, Australia

Do like this product? Would you use it? Or: What is your low VOC, low chemical-irritant kitchen made out of?

 

Michellina Van Loder is a Professional Writer, Journalist and Blogger. This is where she shares her tales about trail blazing her way out of the Labyrinth of Chemical Sensitivities and Mould. This is also where you will find the latest Research on related topics.

The Kitchen Series: An Allergy-Free, Eco-Friendly Kitchen

This is the first post in ‘An Allergy-Free, Eco-Friendly Kitchen’ series. And to save you reading it all at once, I’ve broken up this one long post into handy bit-sized readings for each element needed to create your very own ‘Allergy-Free, Eco-Friendly Kitchen’. Whether you have respiratory issues, chemical sensitivities, mould illness, asthma or any medical condition that is impacted on via air-quality, then these posts are for you.

kitchen-1085990_1280

It’s also come to my awareness since being diagnosed with Inhalant Allergies to various natural and chemical substances, 13 years ago, that there are many parents who want to create a safe haven where little Jane or Jovan can have a calm, joyful place free of allergens and the worry that goes along with avoiding those allergens in everyday life; like at school, it’s the same as not having any peanuts in the house if someone in the family has an allergy.. The same goes for parents of newborns, they want to give their new treasured bundle the absolute best start in life.

Nowhere is your home more of a haven than when you are free to live an allergen, chemical-irritant free life.

An Allergy-Free, Eco-Friendly Kitchen is about creating a worry-free hub where the family can come together to share meals in the most comfortable way possible: free of allergens and chemical irritants that inflame airways and play havoc with sufferers of inhalant allergies, chemical sensitivities, respiratory inflammation, Toxic Encephalopathy, Asthma, Occupational Asthma, Irritant-associated Vocal Cord Dysfunction, Reactive Airways Dysfunction Syndrome (RADS), Irritant-induced Asthma, Small Airways Disease and Multiple Chemical Sensitivity (MCS): all conditions where indoor air-quality is paramount to comfort and good health.

It’s just a matter of choosing the right products suitable for your own situation. The only way to do this and be sure you’re making the right choice is to investigate and research until you find the right product(s). Personally, I like to run ideas past my treating doctor, an Allergist and Immunologist; but mostly, I decide on whether the product or material impacts on my breathing by testing it–I’ll delve more into how I do this, and share ideas on how others do it in another post coming up.).

Dan and I haven’t yet decided on the materials we are going ot use. However, my good internet friend and author, Kathryn Treat, has a left a trail via her book, Allergic to Life: my battle for courage, survival and hope, and our interviews: in Part II of ‘New Beginnings—No Turning Back’, she describes her kitchen being made of completely sealed Formica, which in the US is chipboard/particleboard completely (or at least in her case) sealed on all sides with laminate. The doors in her kitchen are oak, and her window frames vinyl clad.

In the dearly departed author’s words: “This is no cookie-cutter illness; we are all different.”

Oak Doors

I’ve already tested the oak doors, and decided that that’s what we are going to use.

A glue recommend by the Healthy House Institute in the US as it contains aliphatic resins, which dry hard and odourless:

(This is the glue I’m testing for use with some Oak Cabinetry doors! It has the aliphatic resin as recommended by The Healthy House Institute.)

Titebond® Supreme

This is a very fast setting adhesive of the titebond aliphatic resin range. It is Specifically formulated to provide short clamp time for oak and other ring-porous woods. It has excellent heat and solvent resistance and excellent durability for interior exposures. Excellent for Ash and Oak high volume production.

Sizes available: 19lt Pail & 208lt Drum

Visit GREENchoice Website

If we need to save money, which we probably do, we’ll be using glass doors with aluminium edging around them, which I will get to in two shakes of a lambs tale. Basically, our Butler’s pantry [read fruit and vegetable storage room] is going to be mostly glass doors. and shelving with mirror splashbacks so as to appear to give it more space.

Polyvor Aluminium and Glass Doors

Polyvor Aluminium and Glass Doors

Now, for the cabinets, so far we have two choices. Ecological Panels (made from recyclable non-toxic, sustainable & green building materials, or Neemaboard, hardened uPVC board, which is either also sold under the name Waterproof PVC Based Polymer Board from Cowdrey or it’s a different product. The gentleman at Cowdrey who gave me the MSDS said that Neemaboard is no longer called that. So I will just refer to it as Cowdrey PVC Board. It’s actually UPVC or the sample I have that says ‘Neemaboard” on the back (shown below) is different. There actually is a huge difference between PVC and UPVC. So I will sort this out when I do a post in this ‘An Allergy-Free, Eco-Friendly Kitchen’ series of posts, just on the cabinet materials available (maybe 5 posts away?).

(Our thermally-broken, double-glazed windows and frames, already ordered and paid for with Zenit Windows are uPVC (Known as PVCU overseas in countries like Europe), ours have come from Europe, so hopefully, the REACH stricter safety standards will protect my health from VOCs; I still can’t find any reputable information on the amount of VOCs released per square metre anywhere–so far. Except from over at the ATA forum. And from a VOC point, it’s not looking pretty. But from an Ecological standard, they are excellent going by reviews and the recommendation of our Eco Draftsperson, Quin Wyatt.)

Both cabinet products have their advantages. But I will say straight up that Ecological Board stacks up really well in price and suitability compared to the same product that contains formaldehyde in the glues, which hold ordinary particle board together.

Both products can be completely sealed with a 2Pak paint, which hardens just like powder coat, I am told by our kitchen guy.

(I wrote about ‘How to Seal Chipboard in the Kitchen’ way back in 2007 for AESSRA (The Allergy, Environmental, Sensitivity and Support Research Association), who then published it in their magazine, Sensitivity Matters. I can tell you now, the kitchen in the Build an Eco-Friendly, Allergy-Free House project will not be using foil for anything other than wrapping sandwiches! Well there is the Kingspan AirCell 3in1 Building wrap… but that’s the last time, I swear. If you have chemical sensitivities, please laugh along with me.)

Other elements that could make your kitchen allergy-free, keeping indoor air-quality at optimum levels:

  • The kitchen doors
  • The cabinets
  • The bench tops (I have a special guest post coming up from The Allergista about this very topic in regards to transdermal skin allergies! and what can be found in your benchtops)
  • Any coatings or paints used in the sealing or colouring of materials
  • Removal of humid air, eliminating the risk of moisture build up, which could lead to mould growth
  • The flooring

The next post is going to be on Ecological Board, the good, the great and the awesome. Stay tuned.

The Eco-Friendly, Allergy-Free Kitchen Series

 An Allergy-Free, Eco-Friendly Kitchen—Oak. Glass or uPVC or Composite Panels?

 An Allergy-Free, Eco-Friendly Kitchen—By The Allergista: What are Your Countertops Hiding?

An Allergy-Free, Eco-Friendly Kitchen—Ecological Panels, and Building Biology Service, EcoLibria

An Allergy-Free, Eco-Friendly Kitchen—uPVC Board

Michellina Van Loder is a Professional Writer, Journalist and Blogger. This is where she shares her tales about trail blazing her way out of the Labyrinth of Chemical Sensitivities and Mould. This is also where you will find the latest Research on related topics.

Information, products and views presented by guest bloggers @The Labyrinth are not necessarily the same as those held by this blog's author, Michellina van Loder. Reviews are my own personal opinions (unless stated otherwise); and satire is used throughout personal posts. Any health topics discussed are not to be taken as medical advice. Seek out medical attention if needed and do your own research; however, you're welcome to use mine as a start.
Translate »